EXHIBITION
ENOCHLOR

Homepage / News Details

All categories

Anionic polyacrylamide application

  • Categroy:News
  • Author:
  • Origin:
  • Release Time:2021-09-17 11:46
  • Views:

【Summary】Widely used in water treatment, paper making, petroleum, coal, mining, geology, textile, construction and other work departments.

Anionic polyacrylamide application

【Summary】Widely used in water treatment, paper making, petroleum, coal, mining, geology, textile, construction and other work departments.

  • Categroy:News
  • Author:
  • Origin:
  • Release Time:2021-09-17 11:46
  • Views:
Information

Anionic polyacrylamide application:

Widely used in water treatment, paper making, petroleum, coal, mining, geology, textile, construction and other work departments.

Cationic (CPAM) polyacrylamide uses: used as flocculant in sewage treatment for mining, metallurgy, textile, papermaking and other industries. It is used in a variety of operations in the petroleum industry.

Anionic (APAM) polyacrylamide use: anionic polyacrylamide application: in industrial wastewater (electroplating plant wastewater, metallurgical wastewater, steel plant wastewater, coal washing wastewater, etc.) in the flocculation and precipitation.

Non-ionic (NPAM) polyacrylamide uses: clarification purification, sedimentation promotion, thickening and other effects, filtration promotion. In waste liquid treatment, sludge concentration and dehydration, mineral processing, coal washing, paper making and other aspects, can fully meet the requirements of various fields. The combined use of non-ionic polyacrylamide and inorganic flocculants (polyferric sulfate, polyaluminum chloride, ferric salts, etc.) can show a greater effect.

Amphoteric ion (ACPAM) polyacrylamide uses: 1, profile control and water plugging agent, after the oilfield test, the performance of this new amphoteric ion profile control and water plugging agent is higher than other single ion characteristics of profile control and water plugging polyacrylamide. 2, in many occasions to treat sewage and water, anionic polyacrylamide and cationic polypropylene with the use of a single ionic polyacrylamide has a very significant and synergistic effect. Single two if used improperly, will produce white precipitate, lose the use effect. So the use of composite ion polyacrylamide effect is better.

Keyword:

Releate News

Chlorination disinfection
Chlorination disinfection
Time of issue : 2023-01-31 15:45:00
The amount of disinfectant required varies according to the water source and water quality. Generally, 0.5mg to 4.5mg of effective chlorine is required per liter of water. Under normal circumstances, the amount of disinfectant used in surface water is larger than that in underground water...
See more information
The amount of disinfectant required varies according to the water source and water quality. Generally, 0.5mg to 4.5mg of effective chlorine is required per liter of water. Under normal circumstances, the amount of disinfectant used in surface water is larger than that in underground water...
What is the pretreatment of wastewater? What are the goals of preprocessing?
What is the pretreatment of wastewater? What are the goals of preprocessing?
The treatment prior to biochemical treatment is conventionally referred to as pretreatment. Because the cost of biochemical treatment is relatively low, the operation is relatively stable, so the general industrial wastewater is treated by biochemical method,
See more information
The treatment prior to biochemical treatment is conventionally referred to as pretreatment. Because the cost of biochemical treatment is relatively low, the operation is relatively stable, so the general industrial wastewater is treated by biochemical method,
Some problems in calcium hypochlorite storage
Some problems in calcium hypochlorite storage
Time of issue : 2022-11-30 15:02:32
(1) Ignition and explosion characteristics and fire protection Combustibility: combustibility Grade of construction fire risk: B Flash point (° C) : Meaningless Spontaneous combustion temperature (℃) : meaningless Lower explosive limit (V%) : Meaningless Upper explosion limit (V%) : Meaningless
See more information
(1) Ignition and explosion characteristics and fire protection Combustibility: combustibility Grade of construction fire risk: B Flash point (° C) : Meaningless Spontaneous combustion temperature (℃) : meaningless Lower explosive limit (V%) : Meaningless Upper explosion limit (V%) : Meaningless
Previous page
1
2
50

CONTACT US

HAI XING ECONOMIC DEVELOPMENT AREA, HAI XING COUNTY 061200, HEBEI 

PRODUCTS

CALCIUM HYPOCHLORITE
TCCA
SDIC
BCDMH

FEEDBACK

Username used for comment:
Customer message
Description:
验证码

© 1999-2018 北京网站建设有限公司 Copyright © 2012-2022 All Rights Reserved   Powered by www.300.cn   冀ICP备12012949号  津公网安备 12010302002173号     Seo tag